Language

English

Currency

USD (US Dollar)

GBP (Pound Sterling)

EUR (Euro)

CAD (Canadian dollar)

1/1

Super PDR Paintless Dents Repair Kit 48 Pcs, PDR Tool Kit with Upgraded LED Reflection Board, T-Puller, Bridge Puller, Dent Lifter etc.

Name: Super PDR Paintless Dents Repair Kit 48 Pcs, PDR Tool Kit with Upgraded LED Reflection Board, T-Puller, Bridge Puller, Dent Lifter etc.
Brand: Super PDR
Price: 89 USD
Availability: InStock
Rating: 5 (1 reviews)

The PDR kit that contains everything you need.

5 (1 Reviews)

~~$99.00~~ $89.00

Received successfully

Coupon Code

CONTINUE SHOPPING

Add to Favorites

1/1

Description
Features
Instructions
FAQs and Notes

【DIY conveniently】Super PDR Tools Kits helps save you time and money at repair shops, you could conveniently repair the dent or damage caused by strike or hail by yourself.

【Easy to use】The clever design and clear user manual makes it super easy to operate, anyone can repair the dents directly, no professional guidance needed.

【Universal Scenes】The Paintless Dent Repair Kit is suitable for the dents on sheet metal of automobile, refrigerator, washing machine etc. The different sized puller gasket can be used to repair dents with different sizes.

【Basic Steps】Clean the dents first. Heat the glue 3-5 minuted until it's melted and blistered, then spread the glue on the pull gasket, so that the adhesion and dent repair effect are the best. After fixing the dent, heat the glue for 30 seconds with hot water. Then use alcohol to clean the extra glue on the car. And we're done!

【Patented Design】Super PDR dent lifter is a PATENTED product, the bottom is not made from ordinary rubber, but silicone, which is soft and does no harm to paint and can be easily removed. The product is very strong and durable.

Instructions of Dent Repair

1. If the dent is due to the reflection of the car hardly visible, use the line board to help you find the dent, and mark it with marking pen.
2. lnsert the glue stick into the glue gun and heat the stick for 3-5 minutes.
3. Apply the melted glue on the tab, remember to start from the center of tab and make sure the glue is even and full.
4. Align the tab with the center of the dent and slightly press the tab for 3-5 minutes until it cools down and the tab is fixed on the dent.
5. Choose different tools for different types of dents as Page 3 suggests and follow corresponding step:

【PDR T】Buckle the T-puller till it's fastened, hold the handle of the puller and carefully hit the slide hammer to pull the dents, repeat the process until the the surface is flat or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.
【PDR D】Buckle the lifter till it is fastened, hold the handle gradually to pull the dent, repeat several times till the surface of the dent flattens or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.
【PDR B】Use the metal tab, put the screw part of the tab through the hole in the middle of the bridge. Install the nut and screw it carefully till the surface of the dent flattens or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.

6. After repair, turn on PDR C and blows hot air to the solidified glue until it's softened, the remove it with the scraper. If there's still glue remained, spray the glue solvent PDR F on the glue and wait 2 minutes. Then remove it with rag.
7. Some small dents are difficult to find, and the line board helps you to find the dent, the curve lines reflected on the board shows the location of the the dents.
8. Use the line board to check again after repair, if the lines on the board are parallel, the repairt turns to be successful.

Frequently Asked Questions About Dent Repair

Q: Which dents can be repaired and which cannot?
A: Some smooth dents and hail dents can be well repaired, while the dent edges need more patience with different tools. Some tiny dents caused by sharp object is hard to repair. If the part with tiny dent can be removed or the backside of the dent is within reach, you can directly deal with it with line board, tap down pen and rubber hammer. Never use a iron hammer or other hard objects to repair, which may damage the paint. The tools do not work if the paint is already damaged.

Q: ls the operation simple?
A: It is very simple to operate. With careful reading of tutorial and our guidance, even a beginner without any experience can make it.

Q: What should I do if the glue doesn't work well?
A:
1.The glue works better in sunny days with temperature between 20 and 28°C.
2.The effect of the glue depends on humidity and temperature. Normally, the melted glue will dry within 2-5 minutes in summer days and 1-3 minutes in cold days. However the actual situation could be different, sometimes 20 seconds might also be enough.
3.If the tab falls off in the process of repair, the reason could be various, such as the lack of glue, too high temperature of car body or incorrect operation. You are supposed to apply more glue, turnoff the engine, and operate repeatedly until it's done.

Notes About Dent Repair

· If the paint of your car is not original, we suggest you not to buy our tools as it may damage the paint.
· Glue sticks or repair tools bought from some local stores may fail to do the job as expected. They can't guarantee a good repair effect and may damage the paint. Our tools are professionally designed and have been proven better by customers in the past years. The paint won't be damaged and the repair effect is pretty good if operated correctly.
· Do not use the glue gun with car charging when the dent is on hood, which will cause high temperature and influence the effect of the glue.
· Do not repair under the blazing sun because the high temperature of car body will influence the effect of the glue.
· If the glue becomes fragile in an extremely cold environment, you could pour hot water or use PDR C to heat the dent first and then apply the glue.
· When applying the glue, remember to start from the center of the tab and in a circle inside and out, make sure the glue is even and full on the tab.